An air conditioner is said to be reversible when it offers both heating and cooling modes.
This is the name given to the indoor unit of the air conditioning system.
A Mono-Split is an air conditioning system with only one indoor unit.
A Mono-Split is an air conditioning system with two indoor units.
A Mono-Split is an air conditioning system with three indoor units.
Yes, all our air conditioners are pre-charged with gas, as are our refrigeration links ReadyClim.
Included in the carton of the indoor unit :
- Remote control with batteries
- 2m condensate hose for the indoor unit
- Protective foam fitting
Included in the outdoor unit box:
- Insulating tape
- Wall outlet
- Condensate drain connection
- 4 anti-vibration block
- 6m of electrical wiring
Our reversible air conditioners Airton are supplied with a 6 meter electrical connection. In case of a longer cooling length, it will be necessary to extend the electrical connection.
Yes, 2 refrigerant connections ReadyClim are required. Each of the indoor units must be connected to the outdoor unit by a refrigerant connection Readyclim.
Yes, 3 refrigerant connections ReadyClim are required. Each of the indoor units must be connected to the outdoor unit by a refrigerant connection Readyclim.
If you want to control each indoor unit via Wi-Fi, you will need to purchase one module per unit.
If you want to control each indoor unit via Wi-Fi, you will need to purchase one module per unit.
The following part numbers are compatible with the WIFI module: 409730, 409731, 409732, 409733, 409894. These are reversible air conditioners Airton with the title "WIFI READY".
It is not possible to answer this question precisely. It will depend on the power of the air conditioner, the surface area and volume of the room, the set temperature and the outside temperature.
However, the coefficient of performance allows a fourfold reduction in consumption compared to a traditional electric heater.