The installation of a reversible air conditioner / air-to-air heat pump Airton includes the installation of the units, the drilling of the walls, the positioning of the power supply for future connection of the units, and the installation of the refrigeration links ReadyClim.
Please note that the installation of a reversible air conditioner is different from its commissioning. Please refer to the appropriate section for more details. Installation usually includes the installation and commissioning of the air conditioning system.
We do not offer installation services, however, we provide you with a list of our partners on our website. You can contact them directly for an installation quote.
The drilling diameter should be between 6 and 8cm.
The length of the condensate pipe is 2x2m.
For models from 2500W to 3400W, use 16A. For the 5130W and BI SPLIT models use 20A. And for TRI SPLIT use 25A.
It is best to connect your air conditioner to an independent power supply at the meter.
They are located on the right side, flush with the left side. However, these tubes can be manipulated and straightened to 90° for direct exit into the wall, 180° for exit to the right.
Yes, however, if there is more than a three metre difference in height between the two units, an oil trap should be used.
No, as the name suggests, an outdoor unit must be placed outside.
No, our home air conditioners are not designed and intended to maintain the temperature of a wine cellar.
This is possible, however, you will need to ensure that the available power supply is sufficient for an air conditioner.
Yes, this is possible. However, a conservatory, which usually has a lot of glass panels, is often very cold in winter and very hot in summer. It is therefore necessary to increase the power of the air conditioner for optimum comfort.
On our website, we provide you with a list of our partners. You can contact them directly.
